Blog

How To Install Magnetic Contact Series 2325-2327 for Door Panel Installation Instructions Description The 2300 Series is designed for use with sectional/panel overhead doors that use metal roller tracks. The contact fits roller tracks up to 3 inches wide. Selecting a Location Use the following guidelines to select a location for the contact: • Mount the switch high enough so the cable is off the floor.  If other track-mounted devices interfere, mount the switch under them. …

How To Install Magnetic Contact Series 2315-2317 for Panel Door Installation Instructions Mounting Caution: Locate the magnet away from manual handles and latches to prevent it from being used as a foothold or handle to close the door. 1. Slide the slot of the switch over the beveled-edge of the L-bracket and snap it tightly into place as shown in Figure 1. Screw down firmly. 2. Align the magnet with the switch and use screws to attach it to the door as shown in Figure 2. The switch …

How To Install Magnetic Contact Series 2302-2304 Mounting / Installation Close the door. Adjust the interlocking bracket into the appropriate slot in the switch housing to fit the specific curtain door channel. Place the unit on the channel, making sure the outer lip of the switch housing is positioned so it overlaps the edge of the channel. See Figure 1 for proper mounting. Figure 1. Mounting Move the switch and bracket assembly so that it is no more than 48" from the surface of …

How To Install Integrity Series INT-22-5R1-24 Safety Instructions   Only trained professional electricians may install, startup, modify, and retrofit this equipment! Disconnect the device / system from all power sources prior to starting any work! If installation or system errors occur, line voltage may be present at the control circuit in devices without DC isolation! Observe all electrical safety regulations issued by the appropriate technical authorities or the trade association. Th …

How To Install Integrity Series INT-05 Safety Expansion Relay Applies to the following part numbers and more: INT-05-024 INT-05-120 Description The Sentrol INT-05-024 or INT-05-120 Expansion Safety Relay is intended for use as part of a safety circuit. It provides three additional safe output contacts when used with the GE Security INT-03 Safety Monitor Relay or INT-04 Emergency-Stop Safety Relay. The INT-05 uses positive-guided relays along with feedback contacts to the INT-03 or INT …