Parker Partek

Parker Partek PV-10 Pneumatic Actuated Normally Open 3-Way Diaphragm Valve, PFA body, machined mod PTFE diaphragm, 0.250 in orifice, 0.51 gpm @ 5 psid, vac-80 psig @ 0-150 deg F, 1/4 Pargrip, PVDF nuts, 1/8 FPT 20-120 psig air, 0.24 Cv.

Parker Partek CV-1 Check Valve, Style 1, machined PTFE components, 0.25-0.75 psig cracking pressure, 5.0 psig back check sealing pressure, vac-120 psig @ 50 to 212 °F, 1/2" Parflare, PFA nuts, 2.03 Cv.

Parker Partek PV/MV-10 Snap-In Base Plate.

Parker Partek Pargrip PFA Tube Fitting, Redi-flare reducing elbow connector, 0.09 orifice x 1/4 in Redi-flare x 1/8 in Pargrip, PFA body, PVDF nut, PFA nut, 125 psig @ 200 °F.

Parker Partek Parflare PFA Tube Fitting, Adapter Male Straight, 0.13" orifice, 1/4" Parflare x 1/4" MNPT, 5/8" Hex, PFA body, PFA nut (-T), panel mount (-P), 180 psig @ 100 °F.

Parker Partek SG-1 Spray Gun FEP Coil, 8.0' Length FEP Coil. For use with SG-1 DI Water Spray Guns.

Parker Partek MV-11 Manual 2-Way On/Off Diaphragm Valve, PFA body, machined mod PTFE diaphragm, straight through, 1/2 Parflare, PVDF nut, 1/4-28 UNF test port, 0.50 in orifice @ 2.3 Cv, 4 gpm @ 4 psid, vac to 100 psig @ -0 to 150 deg F fluid temp.

Parker Partek Pargrip PFA Tube Fitting, Elbow Connector, 0.18" orifice x 1/4" Pargrip x 1/4" Pargrip, PFA body, PVDF nut, PFA nut, 125 psig @ 200°F.