787-734 WAGO Power Supply Units ECO Switch-Mode AC/DC Power Supply Unit (SMPS PSU)

Image may represent a range of products. Product may vary based on listed specifications.

WAGO Power supply units Eco switch-mode AC/DC power supply unit (SMPS PSU), (Power supply units Eco series), 24Vdc (SELV) / 20A / 480W output, Input voltage 85-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)/130-373Vdc (Single-phase AC (1AC) or DC), with Push-in CAGE-CLAMP spring connections, DIN-35 rail mounting (115mm width), IP20, rated for -25°C...+70°C ambient, equivalent to 787734.

Manufacturer: WAGO
LINKS_Browse All WAGO Products: /manufacturers/wago
Product Category: Power Supplies
Product Type: Switched-Mode Power Supply
Ambient air temperature for operation: -25°C...+70°C
Ambient air temperature for storage: -25°C...+85°C
Ambient temperature (operation at UN): -25 | 70 °C
Circuit protection - Internal fuse: T 10 A / 250 VAC
Connection technology: Push-in CAGE CLAMP®
Connection technology 2: Push-in CAGE CLAMP®
Connection type (electrical) (filter / rank = 0005030): Terminals (Cage-clamp)
Connection type 2: Output
Degree of pollution: 2
Degree of protection: IP20
Depth from upper-edge of DIN-rail: 144 mm / 5.669 inches
Derating: See instruction manual
Dimensions: H136mm x W115mm x D144mm
Efficiency: 0.9
Efficiency/power losses - Efficiency (typ.): 0.9
Efficiency/power losses - Power loss (max.) Pl (max.): 107 W (110 VAC / 24 VDC; 23 A)
Efficiency/power losses - Power loss Pl: ≤ 65 W (230 VAC; nominal load)
Fine-stranded conductor: 0.5 - 6 mm² / 20 - 10 AWG
Fine-stranded conductor 2: 1.5 | 16 mm² / 16 | 6 AWG
General approvals additional text: TP TC 004/2011,TP TC 020/2011|UL 60950-1|UL 508
Height: 136 mm / 5.354 inches
Hold time: 20ms (230Vac input)
Humidity: 95% relative humidity (RH; no condensation permissible)
Input - Input current Ii: ≤ 3 A (230 VAC); ≤ 6.3 A (115 VAC)
Input - Input voltage range: 1 x AC 85 - 264 V; DC 130 - 373 V
Input - Inrush current: ≤ 30 A
Input - Mains failure hold-up time: ≥ 20 ms (230 VAC)
Input - Nominal mains frequency range: 63 Hz; 0 Hz
Input - Phases: 1
Input - Power factor: ≥ 0.94 (230 VAC); ≥ 0.98 (115 VAC)
Input - Power factor correction (PFC): Active
Isolation voltage (sec.-PE): DC 0.7 kV
MTBF: > 250,000 h (per IEC 61709)
MTBF (Mean Time Between Failures): 250 000h
Mounting mode: DIN rail
Net Width (mm): 115mm
Network frequency: 47-63Hz
Open-circuit-proof: Yes
Operation status indicator: Green LED (24 VDC OK)|Red LED (overload)
Output - Nominal output current Io nom: 20 A (24 VDC)
Output - Nominal output voltage Uo nom: DC 24 V (SELV)
Output - Output voltage range: DC 22 | 28 V (adjustable)
Output - Residual ripple: ≤ 100 mV (peak-to-peak)
Output voltage (DC): 24Vdc (SELV)|22-28Vdc (adjustable)
Output voltage (DC): 20Vdc < Vout ≤ 25Vdc
Overvoltage category: II
Parallel operation: Yes
Pollution degree: 2
Protection class: I
Relative humidity: 95% (no condensation permissible)
Ripple: 100mVpp (output voltage)
Series operation: Yes
Short-circuit-protected: Yes
Solid conductor: 0.5 | 6 mm² / 20 | 10 AWG
Solid conductor 2: 1.5 | 16 mm² / 16 | 6 AWG
Standards and specifications - Conformity marking: CE
Standards and specifications - Standards/specifications: EN 62368-1|EN 61204-3|EN 61000-6-2|EN 61000-6-3|UL 60950-1|UL 508
Sub-range name: Eco series
Supply voltage (AC): 100Vac|110Vac|120Vac|200Vac|208Vac|220Vac|230Vac|240Vac
Supply voltage (AC): 85-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)
Supply voltage (DC): 130-373Vdc
Supply voltage (DC): 200Vdc|220Vdc|250Vdc
Surrounding air temperature (storage): -25 | +85 °C
Transient suppression (primary): Varistor
Type of network: Single-phase AC (1AC) or DC
WAGO connector: WAGO 2706 Series
WAGO connector 2: WAGO 2716 Series
Weight: 2120g
Width: 115 mm / 4.528 inches
Connection type (electrical): Terminals (Cage-clamp)
IP Rating: IP20
Input Voltage Range: AC 110 to 240 V
Output Power: 480 W
Output Voltage: DC 24 V