787-1701 WAGO Power Supply Units ECO Switch-Mode AC/DC Power Supply Unit (SMPS PSU)

Image may represent a range of products. Product may vary based on listed specifications.

WAGO Power supply units Eco switch-mode AC/DC power supply unit (SMPS PSU), (Power supply units Eco series), 12Vdc (SELV) / 2A / 24W output, Input voltage 90-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)/125-375Vdc (Single-phase AC (1AC) or DC), with CAGE-CLAMP spring connections, DIN-35 rail / Wall (screws) mounting (30mm width), IP20, rated for -20°C...+60°C ambient, equivalent to 7871701.

Manufacturer: WAGO
LINKS_Browse All WAGO Products: /manufacturers/wago
Product Category: Power Supplies
Product Type: Switched-Mode Power Supply
Ambient air temperature for operation: -20°C...+60°C
Ambient air temperature for storage: -25°C...+75°C
Ambient temperature (operation at UN): -20 | 60 °C
Circuit protection - Internal fuse: F 1 A / 250 VAC
Connection technology: CAGE CLAMP®
Connection type (electrical) (filter / rank = 0005030): Terminals (Cage-clamp)
Degree of pollution: 2
Degree of protection: IP20
Depth from upper-edge of DIN-rail: 99 mm / 3.898 inches
Derating: -4 %/K (> 45 °C)
Dimensions: H90mm x W30mm x D99mm
Efficiency: 0.8
Efficiency/power losses - Efficiency (typ.): 80 % (230 VAC; 2 ADC)
Efficiency/power losses - Power loss Pl: ≤ 6 W (230 VAC; 12 VDC; 2 A)
Fine-stranded conductor: 0.08 - 2.5 mm² / 28 - 12 AWG
Fire load: 0.129MJ
General approvals additional text: TP TC 004/2011,TP TC 020/2011
Height: 90 mm / 3.543 inches
Hold time: 10ms (230Vac input)
Humidity: 10-95% relative humidity (RH; no condensation permissible)
Input - Input current Ii: ≤ 0.7 A (100 VAC)
Input - Input voltage range: 1 x AC 90 - 264 V; DC 125 - 375 V
Input - Inrush current: ≤ 18 A
Input - Mains failure hold-up time: ≥ 10 ms (230 VAC)
Input - Nominal mains frequency range: 63 Hz; 0 Hz
Input - Phases: 1
Input - Power factor correction (PFC): Passive
Isolation voltage (sec.-PE): DC 0.7 kV
MTBF: > 300,000 h (per IEC 61709)
MTBF (Mean Time Between Failures): 300 000h
Mounting mode: DIN rail|Surface
Net Width (mm): 30mm
Network frequency: 47-63Hz
Open-circuit-proof: Yes
Operation status indicator: Green LED (U<sub>o</sub>)
Output - Nominal output current Io nom: 2 A (12 VDC; 110 | 240 VAC); 1.6 A (12 VDC; 100 | 240 VAC)
Output - Nominal output voltage Uo nom: DC 12 V (SELV)
Output - Output voltage range: DC 10 | 14 V (adjustable)
Output - Residual ripple: ≤ 150 mV (peak-to-peak)
Output voltage (DC): 12Vdc (SELV)|10-14Vdc (adjustable)
Output voltage (DC): 10Vdc < Vout ≤ 15Vdc
Overvoltage category: II
Parallel operation: Yes
Pollution degree: 2
Protection class: I
Relative humidity: 10 - 95 % (no condensation permissible)
Ripple: 150mVpp (output voltage)
Series operation: Yes, for 2 devices of the same type
Short-circuit-protected: Yes
Solid conductor: 0.08 | 2.5 mm² / 28 | 12 AWG
Standards and specifications - Conformity marking: CE
Standards and specifications - Standards/specifications: EN 61204-3|EN 60335-1|EN 61558-2-6|EN 62368-1
Sub-range name: Eco series
Supply voltage (AC): 100Vac|110Vac|120Vac|200Vac|208Vac|220Vac|230Vac|240Vac
Supply voltage (AC): 90-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)
Supply voltage (DC): 125-375Vdc
Supply voltage (DC): 127Vdc|200Vdc|220Vdc|250Vdc
Surrounding air temperature (storage): -25 | +75 °C
Transient suppression (primary): Varistor
Type of network: Single-phase AC (1AC) or DC
WAGO connector: WAGO 236 Series
Weight: 250g
Width: 30 mm / 1.181 inches
Connection type (electrical): Terminals (Cage-clamp)
Input Voltage Range: AC 100 to 240 V
Output Power: 24 W
Output Voltage: DC 12 V