787-2742 WAGO Power Supply Units ECO Switch-Mode AC/DC Power Supply Unit (SMPS PSU)

Image may represent a range of products. Product may vary based on listed specifications.

WAGO Power supply units Eco switch-mode AC/DC power supply unit (SMPS PSU), (Power supply units Eco series), 24Vdc (SELV) / 20A / 480W output, Input voltage 325-575Vac (380Vac / 400Vac / 415Vac / 480Vac)/560-700Vdc (3-phase AC (3AC) or DC), with Push-in CAGE-CLAMP spring connections, DIN-35 rail mounting (80mm width), IP20, rated for -20°C...+70°C ambient, equivalent to 7872742.

Manufacturer: WAGO
LINKS_Browse All WAGO Products: /manufacturers/wago
Product Category: Power Supplies
Product Type: Switched-Mode Power Supply
Ambient air temperature for operation: -20°C...+70°C
Ambient air temperature for storage: -40°C...+85°C
Ambient temperature (operation at UN): -20 | 70 °C
Circuit protection - Internal fuse: 3 x T 3.15 A / 500 VAC
Connection technology: Push-in CAGE CLAMP®
Connection technology 2: Push-in CAGE CLAMP®
Connection type (electrical) (filter / rank = 0005030): Terminals (Cage-clamp)
Connection type 2: Signaling
Degree of pollution: 2
Degree of protection: IP20
Depth from upper-edge of DIN-rail: 170 mm / 6.693 inches
Derating: -2 %/K (> 45 °C)
Dimensions: H130mm x W80mm x D170mm
Efficiency: 0.92
Efficiency/power losses - Efficiency (typ.): 0.92
Efficiency/power losses - Power loss Pl: ≤ 2.15 W (400 VAC; no load); ≤ 42.5 W (400 VAC; Nominal load)
Fine-stranded conductor: 0.5 - 6 mm² / 20 - 10 AWG
Fine-stranded conductor 2: 0.2 | 1.5 mm² / 24 | 14 AWG
Fire load: 0.022MJ
General approvals additional text: TP TC 004/2011,TP TC 020/2011|UL 508|UL 60950-1|UL 62368-1
Height: 130 mm / 5.118 inches
Hold time: 10ms (3 x 400Vac input)
Humidity: 10-95% relative humidity (RH; no condensation permissible)
Input - Input current Ii: ≤ 3 x 1.2 A (400 VAC)
Input - Input voltage range: (2 / 3) x AC 325 - 575 V; DC 560 - 700 V
Input - Inrush current: ≤ 30 A (400 VAC)
Input - Mains failure hold-up time: ≥ 10 ms (3 x 400 VAC)
Input - Nominal mains frequency range: 63 Hz; 0 Hz
Input - Phases: 44960
Input - Power factor: ≥ 0.7 (400 VAC)
Input - Power factor correction (PFC): Passive
Isolation voltage (sec.-PE): DC 0.7 kV
MTBF: > 1,800,000 h (per IEC 61709)
MTBF (Mean Time Between Failures): 1 800 000h
Mounting mode: DIN rail
Net Width (mm): 80mm
Network frequency: 47-63Hz
Open-circuit-proof: Yes
Operation status indicator: Green LED (U<sub>o</sub>)|Red LED (overload)
Output - Nominal output current Io nom: 20 A (24 VDC)
Output - Nominal output voltage Uo nom: DC 24 V (SELV)
Output - Output voltage range: DC 22 | 28 V (adjustable)
Output - Residual ripple: ≤ 150 mV (peak-to-peak)
Output voltage (DC): 24Vdc (SELV)|22-28Vdc (adjustable)
Output voltage (DC): 20Vdc < Vout ≤ 25Vdc
Overvoltage category: II
Parallel operation: Yes
Pollution degree: 2
Protection class: I
Relative humidity: 10 - 95 % (no condensation permissible)
Ripple: 150mVpp (output voltage)
Series operation: 2 devices (max.)
Short-circuit-protected: Yes
Solid conductor: 0.5 | 6 mm² / 20 | 10 AWG
Solid conductor 2: 0.2 | 1.5 mm² / 24 | 14 AWG
Standards and specifications - Conformity marking: <Wago>1</Wago>; EAC
Standards and specifications - Standards/specifications: EN 61204-3|EN 62368-1|cURus 60950-1|cURus 62368-1|cULus 508|CSA C22.2
Sub-range name: Eco series
Supply voltage (AC): 380Vac|400Vac|415Vac|440Vac|480Vac|500Vac|525Vac
Supply voltage (AC): 325-575Vac (380Vac / 400Vac / 415Vac / 480Vac)
Supply voltage (DC): 560-700Vdc
Supply voltage (DC): 575Vdc|600Vdc
Surrounding air temperature (storage): -40 | +85 °C
Transient suppression (primary): Varistor
Type of network: 3-phase AC (3AC) or DC
WAGO connector: WAGO 2606 Series
WAGO connector 2: picoMAX<sup>®</sup> 3.5 (WAGO 2091 Series)
Weight: 1710g
Width: 80 mm / 3.15 inches
Connection type (electrical): Terminals (Cage-clamp)
IP Rating: IP20
Input Voltage Range: (2 / 3) x AC 400 to 480 V
Output Power: 480 W
Output Voltage: DC 24 V