Blog

NK Technologies introduces DT Series Large Aperture Current Transducers.  The DT series combines a hall effect sensor and signal conditioner into a single package for use in DC current applications up to 1200 amps.  Factory calibrated ranges simplify operation and eliminate zero and span pots.  Industry standard 4-20mA, 0-5VDC or 0-10VDC outputs are magnetically isolated from the input to provide maximum safety, and eliminate insertion losses.  Internal power regulation deliv …

Greater simplicity and usability across PLC’s, DAQ’s and power management systems SAN JOSE, CA – NK Technologies introduces the DT Series DC Current Transducer with ambient temperature compensation for increased usability and accuracy. The DT Series improved accuracy is due to a new patent-pending, microprocessor-based method of signal conditioning –  sensor output is automatically adjusted as temperature changes (e.g. installers do not need to add algorithms to adj …

SAN JOSE, CA – The new DT Series 3-Wire Current Transducer from NK Technologies is specifically designed in a compact, space-saving case. The DT 3-Wire uses a common point for both power supply and output signal, and is factory calibrated for a single current range. This 3-wire method for DC current measurement keeps costs in check for projects where many sensors are needed.  “Reliability is key in all monitoring applications, and there are gains in reliability whenever the num …

SAN JOSE, CA - NK Technologies introduces DS1 DC Current Sensors. DS1 current sensors feature a compact and non-adjustable one-piece design to deliver reliable detection of very low DC current levels in a wide range of applications. Their compact and non-adjustable one-piece design simplifies installation, even in crowded control cabinets. DS1 current sensors can be powered by any DC voltage between 10- 28 volts and use the same circuit as the one being controlled, or a separate source of voltag …

NK Technologies introduces CTC Series Signal Converters.  With the CTC series users can utilize an existing standard 5 amp secondary CT or low voltage (0.333 VAC) ProteCT™ current transformer with non-contact ranges as low as 0-5 amps over a conductor to produce a standard 4-20mA two-wire, loop-powered signal.  With DIN rail mounting and a 24 VDC loop-powered supply, the CTC series provides simple snap-in installation that requires no calibration because the primary current trans …