Blog

WRT operates transparently with existing equipment, wirelessly transmits data over long distances, and requires no changes or cabling to add devices to existing networks SAN JOSE, CA –NK Technologies introduces the WRT Series Wireless Data Transmitter/Receiver. This wired-to-wireless solution provides a self-managed mesh network that works with any RS485 network protocol to promote highly reliable system operation in new or retrofit applications. The system allows for wired and wireless e …

SAN JOSE, CA - NK Technologies introduces the VTU Voltage Transducer, which can measure AC or DC circuit voltages to 1200 volts with a single sensor. The sensor produces an analog signal directly proportional to the RMS voltage, making it an ideal tool for detecting power generation issues – such brown outs and phase loss – from both conventional and alternative sources. With industry standard output options (4-20mA, 0-5 and 0-10 VDC), the VTU Voltage Transducer is compatible with mo …

SAN JOSE, CA - NK Technologies introduces the VTU-DIN Series, a high-performance True RMS transducer for sensing voltage in single, three-phase or DC installations. The VTU-DIN measures 0-15 to 0-600 V with an industry standard output proportional to connected voltage in AC circuits with sinusoidal or non-sinusoidal (variable frequency) applications or DC circuits. Standard outputs make the VTU-DIN reliable and easy to use with existing controllers, data loggers and SCADA equipment. It is housed …

NK Technologies introduces VTD Series high-performance voltage transducers. Packaged in a compact and easy-to-install 35mm wide DIN-rail enclosure, the VTD series senses voltage in a wide variety of DC powered installations, including industrial motors, battery chargers, photovoltaic arrays and wind generators.  These cost-effective voltage transducers help avoid motor overheating by detecting below normal voltage conditions, and detect voltage conditions that can stress or damage starter c …

The new CTRC AC Current Transformers offer a flexible coil design that can be installed over multiple conductors or bus assemblies and requires very little space SAN JOSE, CA –The new CTRC AC Current Transformers from NK Technologies monitor circuits up to 2000 amps and produces a safe, low voltage output proportional to the RMS current value. This output is designed as an input to a power monitor or transducer, replicating the AC wave shape with phase angle resolution better than 2°. …