857-500 WAGO 857 Series Frequency Signal Conditioner w/ DIP Switch + Interface Configuration Via Software / App

Image may represent a range of products. Product may vary based on listed specifications.

WAGO 857 Series Frequency signal conditioner with DIP switch + interface configuration via software / app, with 1 x analog output (0-10mA / 2-10mA / 0-20mA / 4-20mA / 0-5Vdc / 1-5Vdc / 0-10Vdc / 2-10Vdc), supply voltage 16.8-26.4Vdc (24Vdc nom.), with Push-in CAGE CLAMP spring connections, DIN-35 rail mounting (6mm width), IP20, rated for -25°C...+70°C ambient, equivalent to 857500.

Manufacturer: WAGO
LINKS_Browse All WAGO Products: /manufacturers/wago
Product Family: 857 Series
Product Category: Connectivity
Product Type: Signal Conditioners
Ambient air temperature for operation: -25°C...+70°C
Ambient air temperature for storage: -40°C...+85°C
Ambient temperature (operation at UN): -25 | 70 °C
Analog outputs type: Current|Voltage
Approvals for marine applications additional text: -|-
Connection technology: Push-in CAGE CLAMP<sup>®</sup>
Connection type (electrical): Terminals (Cage-clamp)
Current consumption at nominal supply voltage: ≤ 40 mA
Degree of protection: IP20
Depth from upper-edge of DIN-rail: 97.8 mm / 3.85 inches
Digital inputs type: NPN|PNP
Dimensions: H94mm x W6mm x D97.8mm
Fine-stranded conductor: 0.34 | 2.5 mm² / 22 | 14 AWG
Fire load: 0.405MJ
General approvals additional text: TP TC 020/2011|UL 508
Height: 94 mm / 3.701 inches
Humidity: 5-95% relative humidity (RH; no condensation permissible)
Input - Input signal type: Frequency generators|NAMUR sensors|NPN/PNP transistor outputs|Mechanical contact (dry contact)
Input sensor type 1 - Coupling: AC/DC (adjustable; AC above 10 Hz)
Input sensor type 1 - Input resistance: 10k
Input sensor type 1 - Measurement range (frequency) 1: 0.1 Hz | 120 kHz
Input sensor type 1 - Measurement span 1 (min.): 10Hz
Input sensor type 1 - Sensor type 1: frequency generator|NPN/PNP transistor output with pull-up or pull-down resistor
Input sensor type 1 - Signal form: Any
Input sensor type 1 - Signal level: 1.5 V; 10 V; 20 V (switchable)
Input sensor type 2 - Hysteresis: 0.45mA
Input sensor type 2 - Measurement range (frequency) 2: 0.1 Hz | 1 kHz
Input sensor type 2 - Measurement span 2 (min.): 10Hz
Input sensor type 2 - Sensor type 2: NAMUR sensor (DIN EN 50227)
Input sensor type 3 - Measurement range (frequency) 3: 0.1 Hz | 20 kHz
Input sensor type 3 - Measurement span 3 (min.): 100Hz
Input sensor type 3 - PNP switching voltage: ≥ 7.5 V (+ residual voltage U<sub>CE</sub> sat)
Input sensor type 3 - Sensor type 3: NPN/PNP transistor output without pull-up or pull-down resistor|mechanical contact (dry contact)
Measurement error - Transmission error (typ.): ≤ 0.1 % of upper-range value
Mounting mode: DIN rail
Net Width (mm): 6mm
Nominal supply voltage: DC 24 V
Operating altitude (max.): 2000m
Output analog - Output signal type: Current|Voltage
Power supply type: 24 VDC
Protection type: IP20
Relative humidity: 5 | 95 % (no condensation permissible)
Solid conductor: 0.08 | 2.5 mm² / 28 | 14 AWG
Standards and specifications - Conformity marking: CE
Standards and specifications - EMC emission of interference: EN 61000-6-4
Standards and specifications - EMC immunity to interference: EN 61000-6-2
Standards and specifications - Standards/specifications: EN 61373
Supply voltage (DC): 16.8-26.4Vdc (24Vdc nom.)
Supply voltage (DC): 24Vdc
Supply voltage range: ±30 %
Surrounding air temperature (storage): -40 | +85 °C
Weight: 36.2g
Width: 6 mm / 0.236 inches