857-364 WAGO 857 Series Plug-In Relay Assembly w/ Socket Base and Ejector + Yellow Led

Image may represent a range of products. Product may vary based on listed specifications.

WAGO 857 Series Plug-in relay assembly with socket base and ejector + yellow LED, single-pole / 1-pole (1P), control voltage 20.4-28.8Vac (24Vac nom.; 50/60Hz; 0.85...1.2 x Uc)/20.4-28.8Vdc (24Vdc nom.; 0.85...1.2 x Uc), 1C/O / SPDT (Single Pole Double Throw) contact, Electromechanical design, Rated current 50mA (30Vdc; DC-13) (max. recommended current to avoid evaporating the Gold flash), with Push-in CAGE CLAMP spring connections, DIN-35 rail mounting (6mm width), IP20, material Hard Gold-plated Silver-Nickel (AgNi + Au) contacts, equivalent to 857364.

Manufacturer: WAGO
LINKS_Browse All WAGO Products: /manufacturers/wago
Product Family: 857 Series
Product Category: Connectivity
Product Type: Relay Assemblies
Ambient air temperature for operation: -40°C...+60°C
Ambient air temperature for storage: -40°C...+70°C
Ambient temperature (operation at UN): -40 | 60 °C
Basic relay - WAGO Basic Relay: 857-157
Connection technology: Push-in CAGE CLAMP®
Connection type (electrical): Plug-in|Terminals (Cage-clamp)
Contacts type: 1C/O|SPDT (Single Pole Double Throw)
Control Voltage (AC): 20.4-28.8Vac (24Vac nom.; 50/60Hz; 0.85...1.2 x Uc)
Control Voltage (AC): 24Vac
Control Voltage (DC): 20.4-28.8Vdc (24Vdc nom.; 0.85...1.2 x Uc)
Control Voltage (DC): 24Vdc
Control circuit - Input voltage range: -15 | +20 %
Control circuit - Nominal frequency range (input voltage): 50 | 60 HzAC / 0 HzDC
Control circuit - Nominal input current at UN: 8.5 mA
Control circuit - Nominal input voltage UN: AC/DC 24 V
Degree of pollution: 2
Degree of protection: IP20
Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
Dielectric strength (open contact) (AC, 1 min): 1 kVrms
Dimensions: H94mm x W6mm x D81mm|6mm width
Electrical durability (with load): 50 000operations
Fine-stranded conductor: 0.34 | 2.5 mm² / 22 | 14 AWG
Fine-stranded conductor; with insulated ferrule: 0.34 | 1.5 mm² / 22 | 16 AWG
Fire load: 0.563MJ
General approvals additional text: UL 508
Height: 94 mm / 3.701 inches
Humidity: 5-85% relative humidity (RH; no condensation permissible)
Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
Insulation type (control/load circuit): Reinforced insulation (safe isolation)
Insulation type (to adjacent devices of different types): Basic insulation
Load circuit - Bounce time (typ.): 3.5ms
Load circuit - Contact material (relay): AgNi + Au
Load circuit - Drop-out time (typ.): 25ms
Load circuit - Electrical life (NO; resistive load; 23 °C): 50 x 10³ switching operations
Load circuit - Inrush current (resistive) max.: (AC) 20 A / 0.02 s
Load circuit - Limiting continuous current: 0.25
Load circuit - Mechanical life: 5 x 10⁶ switching operations
Load circuit - Number of changeover/switchover contacts: 1
Load circuit - Pull-in time (typ.): 15ms
Load circuit - Recommended minimum load: 1 V / 1 mA / 1 mW
Load circuit - Switching capacity: AC-15: 3 A / AC 250 V; DC-13: 2 A / DC 24 V
Load circuit - Switching frequency with/without load (max.): 6 min-1 / 180 min-1
Load circuit - Switching power (resistive) max.: AC 1500 VA; DC (see load limit curve)
Load circuit - Switching voltage (max.): AC 250 V
Material: Hard Gold-plated Silver-Nickel (AgNi + Au) contacts
Mechanical durability (at no load): 5 000 000operations
Mounting mode: DIN rail
Mounting position: Horizontal (standing/lying); vertical
Operating altitude (max.): 2000m
Overvoltage category: III
Poles: single-pole / 1-pole (1P)
Poles: 1P
Pollution degree: 2
Processing temperature: -25 | +50 °C
Protection type: IP20
Rated impulse voltage (Uimp): 4kV
Rated operating voltage (Ue): 250V
Rated surge voltage: 4kV
Rated voltage (AC): 250Vac max. (switching voltage)
Relative humidity: 5 | 85 % (no condensation permissible)
Response time: (OFF=>ON / contacts closing) 15ms / 0.015s|(ON=>OFF / contacts opening) 25ms / 0.025s
Signaling - Status indicator: Yellow LED
Solid conductor: 0.34 | 2.5 mm² / 22 | 14 AWG
Standards and specifications - Standards/specifications: EN 61010-2-201|EN 61810-1|EN 61373|UL 508|ATEX|IEC Ex
Surrounding air temperature (storage): -40 | +70 °C
Temperature range of connection cable per EN 61010-2-201: ≥ (Tambient + 30 K)
Weight: 30.3g
Width: 6 mm / 0.236 inches