Motion Control & Automation Parts & Accessories

Edward Signaling Sentrol 1078C Series 3/4 in Steel Door Contact w/Terminals, 100VAC/DC 0.5A max op voltage, normally open, 7.5VA load rating, 0.4 in nominal sense range, white ABS Plastic, terminls, -40 to 150 F temp range, IP67.

Edwards Signaling Sentrol 1085 Series Surface Screw Mount Contact w/Terminals, 30VAC/DC 0.25 A max op voltage, SPDT, 3VA load rating, 0.375 to 1.25 in nominal sense range, white ABS Plastic, 1 ft wire leads, -40 to 150 F temp range, IP67.

Edward Signaling Sentrol 1078C Series 3/4 in Steel Door Contact w/Wire Leads, 30VAC/DC 0.25 A max op voltage SPDT, 3VA load rating, 0.4 in nominal sense range, white ABS Plastic, 1 ft wire leads, -40 to 150 F temp range, IP67.

Robotunits Fine-Tuning and Fixing Element Kit, Galvanized Steel, Includes: 1 Base Part, 1 Spring, 1 Set Screw GST M08x012SPI, 1 Set Screw GST M08x040, for Post Insertion into 40mm and 50mm Series Extrusions, used for Securing and Fine Tuning Component...

Robotunits Corner Bracket 100 Kit, One Side Centered, GD-Zn Black KTL Coated, Galvanized Steel, used for 90 Deg. connections and as strengthening element in combination with Robotunits fasteners and non-Robotunits extrusions and surfaces, Includes: 1...

Robotunits Linear Slider 40 with Clamping Lever, Materials: Clear Anodized Aluminum, POM-C Black, ABS V0 Black, Galvanized Steel, Includes: 1 Exrusion 25x200 PIL 2520, 2 Sliding Guide Blocks 40 or 50, 2 End Caps CAP 2521, 4 Cylinder Screws w/ Hexagon...

Robotunits Corner Bracket Kit, 40/50, GD-Zn Black KTL Coated, Galvanized Steel, Used for 90 Deg. Fastenings and as Strengthening Element in Combination with Robotunits Fasteners, for both 40mm and 50mm Series Extrusions.

Robotunits Tilt Plate 80 Kit, Includes: 1 Title Plate 80 TIN 4560, 4 Drop-in Nuts TIN4508, 4 Screws DIN 6912 M8x16, 2 Washers DIN 7349 M8, for Variable Connection of Modular Automation System Components, Sturdy Connection of Conveyor and Stand,...