Flow Meters

Seametrics IP800-Series Insertion Paddlewheel Flow Sensor w/factory-mounted FT440, 4-8 in pipe @ 12-4680 gpm flow, 316 SS sensor, PVDF rotor, Ni-bound tungsten carbide shaft, EPDM O-ring, 175 psig @ 130 deg F, 6-24VDC 2.0 mA, #22 AWG, 3 Cond, 18 ft cable

Seametrics MJ-Series Cold Water Pulse Meter, solid-state, long-lasting hall-effect sensor, 3/4 FPT, cast bronze body, 150 psig @ 105 deg F, 0.22-22 gpm, 10 gal/pulse, 24VDC 20 mA pulse output, 12 ft cable, 3 pin control connector

Seametrics PE202-Series Low Flow Magmeter, >20 uS/cm, 3/4 in pipe @ 20 gpm max. (0.2 gpm cut off), 1/2 MPT, PVDF body, HDPE housing, 150 psig @ 130 deg F ambient/200 deg F fluid, 500 pulses/liter, 10-15 VDC, 150 mA

Seametrics PE202-Series Low Flow Magmeter, >20 uS/cm, 3/8 in pipe @ 3 gpm max. (0.03 gpm cut off), 1/2 MPT, PVDF body, HDPE housing, 150 psig @ 130 deg F ambient/200 deg F fluid, 1,000 pulses/liter, 10-15 VDC, 150 mA

Seametrics MJN-Series NSF-61 Certified Cold Water Mechanical Meter, mechanical register (totalizer) only, 2.0 FPT, echo-brass alloy body, 150 psig @ 105 deg F, 1.98-132 gpm, 12 ft cable

Seametrics Cold-Water, Solid-state Pickup, 3/4in

Seametrics Cold-Water, Reed Switch (Dry Contact), 1-1/2in

Seametrics Hot-Water, Reed Switch (Dry Contact), 3/4in